View S20V42AUTOS5D1_1303460.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Leaded Varistors Automotive Series for 42-V Supply Systems
Construction
I Round varistor element, leaded I Coating: phenolic resin I Terminals: tinned copper wire
Features
I New automotive series for 42-V supply systems I This series complies with the electrical requirements for the new
42-V board net as specified in draft standard ISO/TC22 WD42V-1E
I Stable protection level, minimum leakage current I High resistance to cyclic temperature stress: 1000 cycles I High operating temperature of up to 125 C
Applications
I Reliable protection from inductive voltage spikes,
e. g. in wiper and air vent motors, power windows, rear mirror, power seat and other servo drives Taping
I All types available on tape upon request
Type designation Detailed description of coding system on page 39, chapter "General Technical Information" SIOV-S 07 V42 AUTO S2 D1 EPCOS metal oxide varistor Design Rated diameter of varistor disk High operating temperature: 125 C Crimp style Reliability specification (based on AEC-Q200 (Rev.B)) Complies with requirements for 42-V supply systems (to ISO WD42V-1E) General technical data Climatic category LCT UCT Damp heat, steady state (93 % r.h., 40 C) Operating temperature Storage temperature Response time 40/125/56 - 40 C + 125 C 56 days - 40 ... + 125 C - 40 ... + 150 C < 25 ns in accordance with IEC 60068-1
in accordance with IEC 60068-2-3 in accordance with CECC 42 000
197 04/02
Leaded Varistors Automotive Series for 42-V Supply Systems
Maximum ratings (TA = 125 C) Type (untaped) SIOV42-V supply systems S07V42AUTOS2D1 S10V42AUTOS5D1 S14V42AUTOS5D1 S20V42AUTOS5D1 Note:
1) Root-mean-square value of max. DC operating voltage incl. ripple content 2) Peak value of max. DC operating voltage incl. ripple content 3) Max. dynamic overvoltage as per ISO/TC22 WD24V-1E, t s 400 ms
Ordering code
Vrms-op, max1) Vop, max2) V max, dyn3) Wmax P max (2 ms) VDC VDC VDC W J 48 48 48 48 50 50 50 50 58 58 58 58 3,0 6,4 13,0 37,0 0,02 0,05 0,10 0,20
B72207S1390K201 B72210S1390K501 B72214S1390K501 B72220S1390K501
Characteristics (TA = 25 C) Type (untaped) SIOV42-V supply systems S07V42AUTOS2D1 S10V42AUTOS5D1 S14V42AUTOS5D1 S20V42AUTOS5D1 62 62 62 62 Vv (1 mA) V
DV v (1 mA) %
10 10 10 10
Max. clamping voltage C typ (1 kHz) v i nF V A 125 125 125 125 2,5 5,0 10,0 20,0 0,97 2,20 3,80 7,30
Derating curve Page 246 248 249 251
V/I characteristic Page 286 286 286 286
Characteristics Fast temperature cycling
Test methods IEC 60068-2-14, test Na, UCT/LCT, dwell time 15 min 1000 cycles Based on IEC 60068-2-3, 85 C, 85 % r.h., VDC, 1000 h MIL STD 202F, method 108A, UCT, VDC, 1000 h
Specifications |DV/V (1 mA)| 10 % No visible damage |DV/V (1 mA)|1) 10 % No visible damage |DV/V (1 mA)|1) 10 % No visible damage
Damp heat, steady state Max. DC operating voltage
1) Measured in load direction
198 04/02
Leaded Varistors Automotive Series for 42-V Supply Systems
b
s
b
b
s
s
h
h
3 max.
h
1)
1) Bottom view
e od
a
e
a
e
od
VAR0553-D
od
VAR0545-M a
e 1) Seating plane in accordance with IEC 60717
S07V42AUTOS2D1
S10, S14, S20V42AUTOS5D1 1) Seating plane according to IEC 60717
VAR0408-C
Dimensions Type SIOVS07V42AUTOS2D1 S10V42AUTOS5D1 S14V42AUTOS5D1 S20V42AUTOS5D1
1
mm 5,0 7,5 7,5 10,0
a1 mm 1,7 2,0 2,1 2,3
b max mm 9,0 12,0 16,0 22,0
s max mm 4,1 4,8 4,9 5,5
hmax mm 12,0 15,5 20,0 27,0
Imin mm 30,0 30,0 30,0 30,0
d 0,05 mm 0,6 0,8 0,8 1,0
Typical marking (schematic representation)
S20 V42 AUTO yyww
V42 AUTO yyww
Date of manufacture yy ww
VAR0546-U
Year Week
VAR0538-D
For crimp styles S2 and S5 see page 212 Weight Size S07 S10 S14 S20 approx. 0,5 g 1,0 g 2,5 g 5,0 g 199 04/02
a
Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 Munchen, DEUTSCHLAND ++49 89 636 09, FAX (0 89) 636-2 26 89
(
EPCOS AG 2002. Vervielfaltigung, Veroffentlichung, Verbreitung und Verwertung dieser Broschure und ihres Inhalts ohne ausdruckliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen fur Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschure ersetzt die vorige Ausgabe. Fragen uber Technik, Preise und Liefermoglichkeiten richten Sie bitte an den Ihnen nachstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente konnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskunfte daruber bitten wir unter Angabe des betreffenden Typs ebenfalls uber die zustandige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS' prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
(

▲Up To Search▲

Price & Availability of S20V42AUTOS5D1

	To Download S20V42AUTOS5D1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .